SPRAYBOOTH FILTER APPLICATION(ceiling filter and paint stop filter)
The function of a spraybooth filter is to provide a clean working environment for preparing an item for painting and to prevent sanding and grinding dust from contaminating the work environment.It works by circulating air down over the item to be painted.The air then flows through a grate in the floor under the item to be painted.Air is continuously re-cycled in the manner through the filter system.
Their function is to spread air flow evenly over the item being painted and to remove the finest of particles that may get past the primary filters.
Under-grate roll filters, more frequently called paint arrestors or exhaust filters, are located in the floor and collect grinding sanding dust, primer and paint overspray.
Primary (bag / pocket) filters are located in the main housing of the prep station and filter the air before it enters the overhead pads.Pocket filters, which have a significant amount of filter media surface area, are recommended.RT Filtech offers a wide range of primary prefilters (high efficiency and medium efficiency).
